Drill holes on the cement foundation. The depth of the holes is determined by the thickness of the foundation and the length of the bolts.
Step 2
Put the expansion bolt into the hole, and the distance from the hole is 30mm.
Align the bottom beam hole or base hole with the bolt, and tighten the nut with a wrench.
Determine the installation position of the rear column according to the bracket angle, and fix the base and the rear column with bolts.
Step 3
Use corner connections to fix the diagonal beam to the rear pillar, and use bolts to connect the diagonal beam to the base.
Determine the installation position of the keel according to the component mounting holes, and fix the keel on the oblique beam with heterosexual nuts.
We do research and trends of each country to give you the best possible product that will sell in your country. We have been the gold supplier of International Committee Red Cross since 2012.