 |
SINPO
| | Universal Compatibility |
| Works with a wide range of metal roofing profiles, including tin roofs, standing seams, and trapezoidal panels. |
| | Fast Installation |
| Pre-assembled parts with L feet or T feet mount directly to the roof surface—no drilling required for standing seam options. |
| | Structural Integrity |
| Special clamps and self-tapping screws offer strong roof penetration and secure module fixing. |
| | Corrosion Resistant |
| Anodized aluminum rails and SUS304 bolts provide long-term weatherproof durability. |
| | Cost-Effective |
| Fewer components and rapid install time lower your total system cost. |
Step1: Roof Surface Measurement
Identify roof panel type and choose L or T foot accordingly
Step2: Bracket Placement
Position the L/T feet at designated intervals, aligning with rafter or purlin if applicable
Step3: Drilling & Fastening
Secure feet to the roof using self-tapping screws with rubber EPDM washers
Step4: Rail Mounting
Attach aluminum rails to L/T feet with stainless bolts
Step5: Panel Mounting
Use mid and end clamps to secure solar panels
Industrial Factories
Large metal-roof warehouses and factories benefit from efficient installation with no impact on production
Containerized Solutions
Suitable for mobile office units and containerized buildings
Commercial Roofs
Shopping malls and distribution centers with standing seam or trapezoidal metal structures
Agricultural Buildings
Barns, greenhouses, and poultry houses with tin or corrugated metal roofs
Customized Design Support
Free CAD drawings based on your rooftop layout
BOM Generation
Fast and accurate bill of materials for every project
Dedicated Project Support
Access our solar mounting specialists via phone/email throughout installation
Global Logistics
Reliable shipping worldwide with real-time tracking
On-Site Training
Available for large installers – learn best practices for tile roof PV integration
After-Sales Assistance
Lifetime technical support and installation guidance
A: F feet are generally L-shaped brackets for flat or wavy metal roofs, while T feet are lower-profile and used on standing seam roofs without the need to penetrate the roof surface.
Q: Will this system damage the roof?
A: No. With proper sealing and use of EPDM washers or non-penetrative seam clamps, the roof remains watertight and intact.
Q: Is it suitable for heavy snow/wind regions?
A: Yes, the system supports up to 60 m/s wind load and 1.4 KN/m² snow load with proper layout and anchoring.
Q: Can I use this with flexible solar panels?
A: The system is optimized for framed modules but can be adapted with custom clamps.
Q: How long does delivery take?
A: Standard orders can be shipped in 7–15 days depending on quantity and customization.
| | Universal Compatibility |
| Works with a wide range of metal roofing profiles, including tin roofs, standing seams, and trapezoidal panels. |
| | Fast Installation |
| Pre-assembled parts with L feet or T feet mount directly to the roof surface—no drilling required for standing seam options. |
| | Structural Integrity |
| Special clamps and self-tapping screws offer strong roof penetration and secure module fixing. |
| | Corrosion Resistant |
| Anodized aluminum rails and SUS304 bolts provide long-term weatherproof durability. |
| | Cost-Effective |
| Fewer components and rapid install time lower your total system cost. |
Step1: Roof Surface Measurement
Identify roof panel type and choose L or T foot accordingly
Step2: Bracket Placement
Position the L/T feet at designated intervals, aligning with rafter or purlin if applicable
Step3: Drilling & Fastening
Secure feet to the roof using self-tapping screws with rubber EPDM washers
Step4: Rail Mounting
Attach aluminum rails to L/T feet with stainless bolts
Step5: Panel Mounting
Use mid and end clamps to secure solar panels
Industrial Factories
Large metal-roof warehouses and factories benefit from efficient installation with no impact on production
Containerized Solutions
Suitable for mobile office units and containerized buildings
Commercial Roofs
Shopping malls and distribution centers with standing seam or trapezoidal metal structures
Agricultural Buildings
Barns, greenhouses, and poultry houses with tin or corrugated metal roofs
Customized Design Support
Free CAD drawings based on your rooftop layout
BOM Generation
Fast and accurate bill of materials for every project
Dedicated Project Support
Access our solar mounting specialists via phone/email throughout installation
Global Logistics
Reliable shipping worldwide with real-time tracking
On-Site Training
Available for large installers – learn best practices for tile roof PV integration
After-Sales Assistance
Lifetime technical support and installation guidance
A: F feet are generally L-shaped brackets for flat or wavy metal roofs, while T feet are lower-profile and used on standing seam roofs without the need to penetrate the roof surface.
Q: Will this system damage the roof?
A: No. With proper sealing and use of EPDM washers or non-penetrative seam clamps, the roof remains watertight and intact.
Q: Is it suitable for heavy snow/wind regions?
A: Yes, the system supports up to 60 m/s wind load and 1.4 KN/m² snow load with proper layout and anchoring.
Q: Can I use this with flexible solar panels?
A: The system is optimized for framed modules but can be adapted with custom clamps.
Q: How long does delivery take?
A: Standard orders can be shipped in 7–15 days depending on quantity and customization.
